Mitsubishi Montero/Pajero

Contents:

• Introduction
• Notes and ordering information
• Return to the main Body Lift page

Introduction:

For the Montero vehicles, the 2" body lift is the most popular height ordered. Many folks reporting the ability to fit 33" tall tires after installing a 2" body lift, given a reasonable wheel and tire combination.

There are 3 basic body mount variations for the Mitsubishi Montero/Montero Sport//Pajero and Dodge Raider, Hyundai Galloper vehicles (Gen-I and Gen-II models, through 2000 model year or last year of body on frame construction), based upon the number of body mounts present, that being:

• 8 Mounts - short wheelbase
• 10 Mounts - short wheel base
• 12 Mounts - Long wheel base

How to determine which type of kit you need for your vehicle?

• The best way to tell is to climb underneath the vehicle and count the body mounts.
  • There will be a pair up front under the radiator.
  • There will be a pair in back under the rear door.
  • Then there will be pairs (same on each side) from the front to the back, typically located under each pillar of the body.
    • There are generally two under the A-pillar (under the windshield)
    • Two under the B-pillar (back side of the front doors)
    • Then 0 or more mounts towards the back of the vehicle:
      • 4-door vehicles will typically have mounts under the C-pillar (back side of the rear doors)
      • Sometimes there is an additional pair of mounts behind the rear wheel wells.
    • 2 door models usually have 8 or 10 mounts
    • 4 door models usually have 10 or 12 mounts
  • If you don't want to bother checking, just order the 12-mount kit (D12) and you'll have all the blocks and bolts you'll need.

Hardware is available in several options:

• Note that some vehicles use 1" longer body mount bolts for the rear.
  • Longer bolts can be requested at time of order if you have found your vehicle requires this
  • Or, for convenience, order the Extra long Hardware (EH) option to get both long and short rear bolts
  • The need for longer rear bolts is usually visually obvious as their heads of the bolts will sit on top of the floor instead of being sunk below the floor level like the other bolts (bolts may be hidden behind the rear corner trim panels).
  • Or you can simply remove one rear bolt and one of the other bolts and compare the lengths to see if you require the longer bolts.
• Standard grade (Grade 5) hardware is included in kits Dxx, includes longer bolts/nuts/washers for each body mount location
  • Hardware may be upgraded to Heavy Duty (Grade 8) by ordering the HDxx option
  • Hardware may be upgraded to Stainless Steel (316 alloy) by ordering the SSxx option
    • Note that the HDxx or SSxx hardware options (mutually exclusive) replace the standard grade hardware in kit Dxx, you'll only receive one set of body mount bolts
• Shift lever extensions (kit SL) for the Montero vehicles now available, fits shifters with screw-on knobs with M10-1.25 thread pitch.
• Bed Spacers (kit BS) can be used to support the center of the cargo bed over the rear wheels, if needed
• Polyurethane body mount bushings (kit Pxx) replace the stock rubber bushings, if needed.
  • Available in red color, only. Possible to paint the bushings a different color after installation.
  • On some Generation 2 Monteros, the front pair of body mounts is a 1 piece unit and can't be replaced.
    • If so, leave these body mounts as-is and replace the remaining ones.
    • You can order a kit with 2 fewer mounts if this applies or return the unused bushings.
• In the pricing tables below, the "Typical Kits" for each given lift height and vehicle is listed, both in an itemized list at the bottom of each lift height and as bold text in the table columns.
  • The "Typical Kit" contains those parts typically needed to lift a typical vehicle that height, thus the name "Typical Kit".
  • A typical vehicle is one that is somewhat close to stock, that is has the stock engine, stock steering, stock bumpers, etc.
  • Feel free to add or subtract from the typical kit as your needs dictate;
    • So if you wish to upgrade to the Heavy Duty hardware, add the HD option to your kit and adjust the price accordingly.
    • Clicking on the links under the DESCRIPTION column in the tables below take you to a DESCRIPTION OF THE ITEM.
    • If an item price is listed under a given height but not highlighted as part of the typical kit, that means it is not typically ordered as part of the typical kit, but can be installed if desired. Consult the installation notes for that item to see what other options are available in lieu of installing that particular item.
    • If an item is listed as "n/a" under a given lift height, it is "not applicable" or "not available" at that given height.
    • If you want to order that kit or item, click on the shipping/ordering link.
• NOTE: Pricing on this page reflects the "kit discount" on certain items when purchased as part of a body lift kit.
  • For ordering individual items, consult the main body lift kit page...

8 Body Mounts - short wheelbase (prices in US $):

Notes:

• n/a = Not applicable or not available for a given height
• HD8/SS8: For Heavy Duty or Stainless Steel hardware upgrade, kit C or D must also be ordered
• EH: Some vehicles require extra long hardware at the rear, you can check ahead of time or order the EH option to get the extra long hardware just in case.
• Prices (US $) do not include sales tax or shipping
• Notes and ordering information
• Return to the top of this page

10 Body Mounts - short wheelbase (prices in US $):

Notes:

• n/a = Not applicable or not available for a given height
• HD10/SS10: For Heavy Duty or Stainless Steel hardware upgrade, kit C10 or D10 must also be ordered
• EH: Some vehicles require extra long hardware at the rear, you can check ahead of time or order the EH option to get the extra long hardware just in case.
• P10: For poly bushings, some vehicles will have 2 body mounts (cushions) that are of a 1-piece design and can't be replaced like the rest.
  • In this case, you can order the 8-bushing kit (above) in place of the 12-bushing in this table.
  • How to tell which type you have? Climb under the vehicle and look at all the body mount bushings (cushions). If all of them look the same, you can use the 10-mount kit (P10), if 8look the same and 2 look different (typically with a flange that bolts to the frame bracket), you can save a little money by ordering the 8-mount kit (P8).
• Prices (US $) do not include sales tax or shipping
• Notes and ordering information
• Return to the top of this page

12 Body Mounts - long wheelbase (prices in US $):

Notes:

• n/a = Not applicable or not available for a given height
• HD12/SS12: For Heavy Duty or Stainless Steel hardware upgrade, kit C or D must also be ordered
• EH: Some vehicles require extra long hardware at the rear, you can check ahead of time or order the EH option to get the extra long hardware just in case.
• P12: For poly bushings, some vehicles will have 2 body mounts (cushions) that are of a 1-piece design and can't be replaced like the rest.
  • In this case, you can order the 10-bushing kit (above) in place of the 12-bushing in this table.
  • How to tell which type you have? Climb under the vehicle and look at all the body mount bushings (cushions). If all of them look the same, you can use the 12-mount kit (P12), if 10 look the same and 2 look different (typically with a flange that bolts to the frame bracket), you can save a little money by ordering the 10-mount kit (P10).
• Prices (US $) do not include sales tax or shipping
• Notes and ordering information
• Return to the top of this page

NOTES:

1. Add up the cost of each item you want included in your body lift kit:
   1. Typical kit contents and totals are listed in the tables above
   2. Add 8.25% sales tax for shipments to a California address:
      1. If you live outside of California, no sales tax applies
   3. For US addresses (including APO/FPO), add $13.50 for uninsured or $16.00 for insured Priority Mail shipping, for a total
      1. Or use one of the two "Buy Now" buttons below for pre-computed shipping
      2. 2-3 day typical Priority Mail delivery time
   4. International shipping options and also supply a local phone number for customs paperwork
      1. US Mail shipping to Canada/Mexico of US$34.00 for all the above kits
      2. US Mail shipping to most of Europe/Asia/Australia/New Zealand of US$48.00 for all the above kits
      3. Typical shipping time is 6-10 days
      4. Additional shipping and tracking information
2. Specify the year and number of body mount for the Montero/Pajero/Raider
3. Questions?

Ordering/payment options below:

• Whatever ordering option you use, please be sure to DOUBLE CHECK YOUR SHIPPING ADDRESS prior to submitting the order.
  • Orders will be shipped to the address you specify, if that address is incorrect, your order may be delayed
  • Returned orders will be reshipped at your expense.
  • We'll try to correct the address if you send it to us, but we do get SO MANY orders with incorrect addresses it is hard to keep track of which is which, so your best shot is to give us your correct address to begin with.

Purchase w/ uninsured US shipping - Adds US$13.50 shipping automatically	Purchase w/ insured US shipping - Adds US$16.00 shipping automatically	Purchase w/ other shipping option - Add custom shipping cost to order total

• Click here for an order form tutorial
  • In the Payment For field, enter the vehicle and lift desired:
    • For example: 2" Body lift for 19xx Montero/LWB, Kit: D, 12 mounts
  • In the Price field, enter the parts total for the lift, including applicable sales tax and shipping
  • You can log into an existing Paypal account or enter your credit card information if you don't have or want to use a Paypal account
  • In the Note To Seller field, enter any specific options you want in the order
    • For example: Kit: D, 12 mounts
• Via PayPal:
  • https://www.paypal.com/
    • Login, select: Send Money
    • Recipient = sales@4Crawler.com
      • Hint: Cut and paste this into the Recipient field
    • Enter Amount:
      • Be sure to include shipping and applicable sales tax in the total
    • Select Funds Source (e.g. checking account, credit or debit card)
      • Using an e-check results in a 3-4 day delay for the funds to clear Paypal
    • For Transaction Type, select: Goods, Non-Auction
    • Enter Subject/Note describing items desired
      • For example: 2" Body lift for 19xx Mitsubishi Montero
    • In the Note To Seller field, enter any specific options you want in the order
      • For example: Kits: D+HD+EH
    • Check for correct shipping address and hit the "Send" button
      • If in doubt on the address, (or you want to use a different address) please include the address you want to use in the "NOTE TO SELLER" field when given the option above.
      • Double check the shipping address before hitting the "Send" button
    • Notes:
      • Company name will show up as "Visual Diagnostics/4Crawler Offroad"
      • Feel free to e-mail 4Crawler Offroad to let us know you issued the payment, although we automatically get an e-mail notification to this effect.
      • If you prefer, 4Crawler Offroad can issue a PayPal funds request/invoice as well
      • You should receive a confirmation e-mail from Paypal if the transaction was successful.
  • If you don't have a Paypal account, its easy to set one up using the link above, enter your name/address/e-mail and account info.
• Credit Card via fax/mail: FAX:+01.772.264.8458
  • Supply the following information:
    • Name
    • Billing/Shipping address
    • Phone # and e-mail address
    • Credit Card number
    • Expiration Date
    • And the 3 or 4 digit security code on the back (or front) side of the card
• Via mail; certified check/money order payable to (US funds):
  • 4Crawler Offroad
  • Attn: Roger Brown
  • PO Box 61092
  • Sunnyvale, CA 94088-1092 USA
• Via USPS-COD (Collect On Delivery - US only) there is an additional charge for USPS-COD, typically $12.00 (varies with order total)