Toyota 4Runner / Hilux Surf

Contents:

• Introduction
  • Body Lift kit pricing and options
• Notes and ordering information
• Return to the main Body Lift page

Introduction:

• Up to 3" on '84 -'89 (1st gen):
• Up to 3" on '90 - '95 (2nd gen):
  • Leo Castenada is running a 1" body lift on his '95 automatic
  • 3.0L V6 4Runners may have problems at 3" with the stock engine air intake, modifications will be needed
• Up to 3" on '96 - '02 (3rd gen):
  • Adam Fertig did a nice installation write-up
  • Bolt on 9th and 10th body mount brackets for '96 4Runner available for $80.00/pair, useable w/ and w/o body lifts.
  • 3" available but may require gas tank filler hose extensions, etc.
  • Note: Front bumper bracket on '00 - '02 4Runner kits may need to be drilled to accept bumper relocation bracket
  • If running more than 2" of front suspension lift, a front differential drop kit may be installed.
  • Limitations:
    • For RHD models w/ 3.0L turbo-diesel engines, bolt-in steering ext. beyond 1" may not fit, cutting and welding an ext. into the shaft itself may be required.
    • On trucks with the 3.4L-V6 with Edelbrock headers, contact 4Crawler Offroad for questions if running Edelbrock headers.
      • 1" body lift seems to be the maximum lift in this application
    • On trucks with 4" ProComp lifts, steering extension beyond 5/8" tall may not clear the rack drop bracket.
• Up to 1.5" on '03-'09 (4th gen)
• 1/2" lift blocks (only) are available for all models above
  • Typically no need for longer hardware, assuming ~1/2" of excess bolt length on factory hardware
  • Use the 1" lift block pricing (kit A or B) for the given vehicle
  • Shipping is only $8.00 in the US and $13.00 International on the 1/2" block kits
• Shift Lever (SL) extensions of 2" and 3" length for transmission and transfer case shifter with screw-on knobs, only.
• In the pricing tables below, the "Typical Kits" for each given lift height and vehicle is listed:
  • Both in an itemized list at the bottom of each lift height and as bold text in the table columns.
  • The "Typical Kit" contains those parts typically needed to lift a typical vehicle that height, thus the name "Typical Kit".
  • A typical vehicle is one that is somewhat close to stock, that is has the stock engine, stock steering, stock bumpers, etc.
  • Note, things like suspension lifts, larger than stock tires, etc. have little or no impact on a body lift.
    • Afterall, all those things do is to raise the frame higher off the ground. A body lift in turn simply raises the body off the frame. So in a sense the body lift could care less what sort of suspension or tires are sitting below the frame.
  • Feel free to add or subtract from the typical kit as your needs dictate;
    • For example if you have a custom front bumper, subtract the Front Bumper (FB) brackets from your kit and adjust the price accordingly.
    • Or if you wish to upgrade to the Heavy Duty hardware, add the HD option to your kit and adjust the price accordingly.
    • And add the AT bracket kit for 2" and 3" lifts on vehicles with automatic transmissions where that option is listed.
      • Generally required at 2" and above, available in 2" and 3" versions.
      • At 1.5" lift, meaure the clearance between the shift linkage and the transfer case and decide if you'll need a 2" bracket or not.
• There are six basic body lift kit packages to cover the following model years of the Toyota 4Runner/Hilux Surf (4WD and 2WD). Why the date and model ranges below? The grouping below are where there were significant changes in the vehicle design that affects the body lift components to the point where a different kit is needed. Within a given date/model range, all body lift kit components are the same:
  • 1984-1989
  • 1990-1995
  • 1996
  • 1997-2000
  • 2001-2002
  • 2003-2009
• The body lift kits can consist of any of the following items:
  • Body lift blocks:
    • Ultimate blocks in UHMW polyethylene:
      • 2 - 2" OD and 8- 2.5" OD blocks for the body (6 on the 4th gen 4Runner/Hilux Surf)
    • Natural color is white, may be custom colored in black with the CLR option
    • For lifts between the heights listed below, use the next higher kit price, e.g. for a 1.5" lift, use the 2" pricing
  • Hardware is available in several options.
    • Standard grade (Grade 5) hardware is included in kits D, includes longer bolts for each body mount location
    • Hardware may be upgraded to Heavy Duty (Grade 8) by ordering the HD option
    • Hardware may be upgraded to Stainless Steel by ordering the SS option, where applicable
      • HD and SS are mutually exclusive, that is there is no HD+SS option
  • Optional Front Bumper brackets to raise the stock front bumper to match the lift
    • On '84/'85 models, front bumper brackets only avalable in 1 inch increments (i.e. 1", 2", 3")
  • Optional Radiator drop brackets to lower the radiator to align with the stock radiator fan
  • Optional Bed Spacers can be used to support the center of the cargo bed over the rear wheels, if needed
  • Optional Shift lever extensions that screw onto the shift lever to extend it 2" or 3" to match the lift
  • Optional Automatic transmission/transfer case bracket extensions for externally shifted transfer cases
  • Optional Polyurethane body mount bushings to replace the stock rubber bushings, if needed.
• NOTE: Pricing on this page reflects the "kit discount" on certain items when purchased as part of a body lift kit.
  • For ordering individual items, consult the main body lift kit page...

1984-1989 (1st Gen) 4Runner/Hilux Surf (US $):

Notes:

For Heavy Duty, Stainless Steel or Metric hardware upgrade, kit C or D must also be ordered

CLR option, black price shown, US$20.00 for other color

Prices (US $) do not include sales tax or shipping

n/a = Not Applicable at a given lift height

Notes and ordering information

1990-1995 (2nd Gen) 4Runner/Hilux Surf (US $):

Notes:

For Heavy Duty, Stainless Steel or Metric hardware upgrade, kit C or D must also be ordered

CLR option, black price shown, US$20.00 for other color

Prices (US $) do not include sales tax or shipping

n/a = Not Applicable at a given lift height

Notes and ordering information

1996 (3rd Gen) 4Runner/Hilux Surf (US $):

Notes:

For Heavy Duty hardware upgrade, kit C or D must also be ordered

If the 9th/10th body mounts are not desired (kit BB), do not order them and advise whether you want the body lift blocks and hardware for those body mounts if you plan to add your own brackets or plan to do so in the future.

CLR option, black price shown, US$20.00 for other color

Prices (US $) do not include sales tax or shipping

n/a = Not Applicable at a given lift height

Notes and ordering information

1997-2000 (3rd Gen) 4Runner/Hilux Surf (US $):

Notes:

For Heavy Duty hardware upgrade, kit C or D must also be ordered

CLR option, black price shown, US$20.00 for other color

* For poly bushings, default kit is one pair of 1-piece and 4 pair of 2-piece bushings (details here), this covers 99% of these vehicles, but be sure to verify your truck has the one pair of 1-piece bushings are the rear body mounts.

If your vehicle has an additional pair of 1-piece bushings under the A-pillar (same kind of bushings as at the rear), then be sure to specify/order the 2001-2002 4Runner bushing kit (below) to ensure you get a kit with 2 pair of 1-piece and 3 pair of 2-piece bushings.

Prices (US $) do not include sales tax or shipping

n/a = Not Applicable at a given lift height

Notes and ordering information

2001-2002 (3rd Gen) 4Runner/Hilux Surf (US $):

Notes:

For Heavy Duty hardware upgrade, kit C or D must also be ordered

CLR option, black price shown, US$20.00 for other color

Prices (US $) do not include sales tax or shipping

n/a = Not Applicable at a given lift height

Notes and ordering information

2003-2009 (4th Gen) 4Runner/Hilux Surf (US $):

Notes:

Steering extension (SE) required on lifts above 1", and can be installed on 1" lifts

Specify if you would like stock size (7/16") or oversize (1/2") hardware:

Oversize hardware is stronger but may require that body mount washers and bushings be drilled out (to 1/2") to install the bolts

Unless otherwise specified, the oversize hardware will be supplied

Bumpers:

1" lift should not require any trimming for the front and rear bumpers is you have the heavy steel crossmembers behind them

1.25" lift most closely matches the offset of the front bumper mounting studs, so the bumper can be raised one set of studs and line up with minimal gap

1.5" will have a slight gap at the front bumper

For Heavy Duty hardware upgrade, kit C or D must also be ordered

CLR option, black price shown, US$16.00 for other color

Prices (US $)do not include sales tax or shipping

n/a = Not Applicable at a given lift height

Notes and ordering information

NOTES:

1. Add up the cost (in US $) of each item you want included in your body lift kit:
   1. Typical kit contents and totals are listed in the tables above
   2. Add 9.25% sales tax for shipments to a California address:
      1. If you live outside of California, no sales tax applies
   3. For US addresses, add $12.50 for regular or $15.00 for insured Priority Mail shipping, for a total
      1. Or use one of the two "Buy Now" buttons below for pre-computed shipping
      2. 2-3 day typical Priority Mail delivery time
   4. International shipping options and also supply a local phone number for customs paperwork
      1. US Mail shipping to Canada/Mexico of US$28.00 for all the above kits
      2. US Mail shipping to most of Europe/Asia/Australia/New Zealand/South America of US$45.00 for all the above kits
      3. Typical shipping time is 6-10 days
      4. Additional shipping and tracking information
2. Specify the year for the 4Runner, various models require slightly different hardware
3. Questions?

Ordering/payment options below:

• Whatever ordering option you use, please be sure to DOUBLE CHECK YOUR SHIPPING ADDRESS prior to submitting the order.
  • Orders will be shipped to the address you specify, if that address is incorrect, your order may be delayed
  • Returned orders will be reshipped at your expense.
  • Due to a problem in the on-line ordering system, the far right button may be the only one operable, so simply add your desired shipping cost to the parts cost for a total:

Purchase w/ regular US shipping - Adds US$12.50 shipping automatically	Purchase w/ insured US shipping - Adds US$15.00 shipping automatically	Purchase w/ other shipping option - Add custom shipping cost to order total

• Click here for an order form tutorial
• In the Payment For field, enter the vehicle and lift desired:
  • For example: 2" Body lift for 19xx Toyota 4WD 4Runner
  • In the Price field, enter the parts total for the lift, including applicable sales tax and shipping
  • You can log into an existing Paypal account or enter your credit card information if you don't have or want to use a Paypal account
  • In the Note To Seller / Special Instructions field, enter any specific options you want in the order
    • For example: Kits: D+FB+RAD
• Via PayPal:
  • https://www.paypal.com/
    • Login, select: Send Money
    • Recipient = sales@4Crawler.com
      • Hint: Cut and paste this into the Recipient field
    • Enter Amount:
      • Be sure to include shipping and applicable sales tax in the total
    • Select Funds Source (e.g. checking account, credit or debit card)
      • Using an e-check results in a 3-4 day delay for the funds to clear Paypal
    • For Transaction Type, select: Goods, Non-Auction
    • Enter Subject/Note describing items desired
      • For example: 2" Body lift for 19xx Toyota 4Runner
    • In the Note To Seller / Special Instructions field, enter any specific options you want in the order
      • For example: Kits: D+FB+SE+RAD
    • Check for correct shipping address and hit the "Send" button
      • If in doubt on the address, (or you want to use a different address) please include the address you want to use in the "Note to Seller / Special Instructions" field when given the option above.
      • Double check the shipping address before hitting the "Send" button
    • Notes:
      • Company name will show up as "Visual Diagnostics/4Crawler Offroad"
      • Feel free to e-mail 4Crawler Offroad to let us know you issued the payment, although we automatically get an e-mail notification to this effect.
      • If you prefer, 4Crawler Offroad can issue a PayPal funds request/invoice as well
      • You should receive a confirmation e-mail from Paypal if the transaction was successful.
  • If you don't have a Paypal account, its easy to set one up using the link above, enter your name/address/e-mail and account info.
• Credit Card via fax/mail: FAX:+01.772.264.8458
  • Supply the following information:
    • Name
    • Billing/Shipping address
    • Phone # and e-mail address
    • Credit Card number
    • Expiration Date
    • And the 3 or 4 digit security code on the back (or front) side of the card
• Via mail; certified check/money order payable to (US funds):
  • 4Crawler Offroad
  • Attn: Roger Brown
  • PO Box 61092
  • Sunnyvale, CA 94088-1092 USA
• Via USPS-COD (Collect On Delivery - US only) there is an additional charge for USPS-COD, typically $12.00 (varies with order total)