4Crawler Offroad Product Offerings:

• All-vehicle products:
  • 4Crawler Body Lift Kits
  • 4air (and 2air) tire inflation/deflation system
  • Custom Length Spring Shackles
  • Custom Leaf Spring Axle Shims
  • Rock SliderZ nerf bars
  • Electrical Components
    • Starter Solenoid Contacts for Nippon/Denso starter motors
    • Replacement brushes for blower motor
    • Upgraded headlight wiring harness w/ dual relays and easy plug and play installation
      
• Toyota-specific products:
  • NEW Driveshaft Spacers for Toyota Mini-trucks and 4Runners
  • Short Throw Transfer Case Shift Kit
  • 4 and 6 cylinder Toyota Motor/Transfer Case Mount Spacers
  • High Clearance Axle Kit with differential protection
  • Toyota 4WD Front Differential Drop Kits
    • Now for 1986-1995 Pickups and 4Runners
    • And 1995.5-2004 Tacomas and 1996-2002 4Runners
  • '86-95 Pickup/4Runner 2WD and 4WD IFS Ball Joint Spacers
  • '90-'95 4Runner Rear Coil Spring Spacers and Panhard Rod Drop Brackets
  • Hi-Lift Jack Mount for 1st gen 4Runners
  • Easy adjust Throttle Position Sensor bolt kit
  • Rear bumper and tire carrier for 1st gen 4Runners
    
• Used parts for sale...
• Contact Information
  • Multiple Item Orders
  • Returns
  • Gift Certificates

Contact 4Crawler Offroad if interested in more information on any of these items:

PO Box 61092
Sunnyvale, CA. 94088
E-mail : Sales@4Crawler.com
FAX: +01.772.264.8458
Phone number available by request

And please, Please, PLEASE be sure to include a valid Reply-To address in your e-mail if you expect to receive a reply. Several times a week, 4Crawler Offroad receives question by e-mail and the replies are returned as undeliverable due to countless e-mail delivery errors. So if you send a question and do not hear back in a reasonable amount of time, feel free to resend the question, but be sure to double-check that there is a valid "Reply-To" address in the e-mail header or in the body of the message. And if the direct e-mail link above does not work, cut and past "Sales@4Crawler.com" into your e-mail program "To:" field and send a message that way.

Want to order multiple items?

1. Add up the cost of each item you want included in your order:
   1. Typical kit contents and totals are listed in the tables above
   2. Add 8.25% sales tax for shipments to a California address:
      1. If you live outside of California, no sales tax applies
   3. For US addresses, add $12.00 for regular or $15.00 for insured Priority Mail shipping, for a total
      1. Or use one of the two "Buy Now" buttons below for pre-computed shipping
      2. 2-3 day typical Priority Mail delivery time
   4. Inquire for international shipping options and also supply a local phone number for customs paperwork
      1. US Mail shipping to Canada/Mexico of US$25.00 for all the above kits
      2. US Mail shipping to most of Europe/Asia/Australia of US$40.00 for all the above kits
      3. Typical shipping time is 6-10 days
      4. 20 lb. weight limit on the above international shipments.
2. Specify the vehicle details if applicable
3. The shipping options below does not apply to the Rock Sliders as they have their own shipping options.
4. Questions?

Ordering/payment options below:

Purchase w/ small US shipping - Adds $7.00 shipping automatically - For shims, small brackets, etc. that - fit in a small envelope	Purchase w/ regular US shipping - Adds $12 shipping automatically - For body lifts, etc.	Purchase w/ insured US shipping - Adds $15 shipping automatically - For body lifts, etc.	Purchase w/ other shipping option - Add shipping to order total - For all but Rock SliderZ

• In the Payment For/Item field, enter the vehicle and item(s) desired:
  • Multiple items can be listed as follows:
    • Item #1 AND Item #2 AND ...
  • In the Price field, enter the parts total for the parts, including applicable sales tax and shipping if applicable
    • For example if Item #1 is $100 and Item #2 is $50, enter $150 for the parts total
  • You can log into an existing Paypal account or enter your credit card information if you don't have or want to use a Paypal account
  • In the Note To Seller / Special Instructions field, on the follow up screen, enter any specific options you want in the order
• Via PayPal:
  • https://www.paypal.com/
    • Login, select: Send Money
    • Recipient = sales@4Crawler.com
      • Hint: Cut and paste this into the Recipient field
    • Enter Amount:
      • Be sure to include shipping and applicable sales tax in the total
    • Select Funds Source (e.g. checking account, credit or debit card)
      • Using an e-check results in a 3-4 day delay (US) or 7-9 day (international) for the funds to clear Paypal
    • For Transaction Type, select: Goods, Non-Auction
    • Enter Subject/Note describing items desired
    • In the Note To Seller field, enter any specific options you want in the order
    • Check for correct shipping address and hit the "Send" button
      • If in doubt on the address, (or you want to use a different address) please include the address you want to use in the "NOTE TO SELLER" field when given the option above.
      • Double check the shipping address before hitting the "Send" button
    • Notes:
      • Company name will show up as "Visual Diagnostics/4Crawler Offroad"
      • Feel free to e-mail 4Crawler Offroad to let us know you issued the payment, although we automatically get an e-mail notification to this effect.
      • If you prefer, 4Crawler Offroad can issue a PayPal funds request/invoice as well
      • You should receive a confirmation e-mail from Paypal if the transaction was successful.
  • If you don't have a Paypal account, its easy to set one up using the link above, enter your name/address/e-mail and account info.
• Credit Card via fax/mail: FAX:+01.772.264.8458
  • There is a $3.00 service charge for credit card orders
  • Supply the following information:
    • Name
    • Billing/Shipping address
    • Phone # and e-mail address
    • Credit Card number
    • Expiration Date
    • And the 3 or 4 digit security code on the back (or front) side of the card
• Via mail; certified check/money order payable to (US funds):
  • 4Crawler Offroad
  • Attn: Roger Brown
  • PO Box 61092
  • Sunnyvale, CA 94088-1092 USA
  • And you can thank these Dead Beats for the NO PERSONAL CHECKS
• Via USPS-COD (Collect On Delivery - US only) there is an additional charge for USPS-COD, typically $10.00 (varies with order total)

Returns Policy:

• Parts may be returned for a refund within 60 days of original purchase.
  • A 10% restocking fee will be deducted from original purchase price less outgoing postage.
    • Parts must be in new and unused condition for the refund.
      • Used or blemished parts can yield partial refunds at the discretion of 4Crawler Offroad.
    • The customer is responsible for return shipping charges.
    • Returned parts must include a copy of the original invoice or packing slip for proper credit.
    • It is highly recommended that a package tracking number be obtained from the shipper and that that number be transmitted to 4Crawler Offroad so that we are aware that you have sent an item back and that we can track it.
  • One exception to this policy is in the case that the parts do not fit properly, per the installation instructions.
    • In such a case 4Crawler Offroad will refund the full purchase price less shipping.
  • Items returned after 60 days will be refunded less any applicable Paypal transaction fees, typically 2.5% - 3%.
• Return to:
  • 4Crawler Offroad Products
  • attn: Roger Brown
  • PO Box 61092
  • Sunnyvale, CA. 94088-1092

Gift Certificates:

Now available, gift certificates redeemable for 4Crawler Offroad Products merchandise, you set the value and no expiration date:

Portable Winch Cradle:

Having a winch is one thing, but where to mount it is another. Most folks permanently mount it on the front bumper, but what if you need to winch backwards, or what if another vehicle needs a winch and you can't manuever your truck and winch into position? Having a portable winch mount is one solution. By using a standard 2" hitch receiver to attach the winch to the bumper, front or rear, makes it portable.

A: Rear View	B: Front View	C: In Use

Shown above is a custom built winch cradle for a Ramsey REP8000 winch, cradles to fit other makes and models are also available. The cradle features a center receiver tube for conventional receiver installation. The 2" receiver is removeable and can be drilled for both standard and deep receiver pins. A pair of 1" thick shackle tabs are welded to the bottom (one shackle shown attached in picture A) for use as additional bracing for side pulls or for use to strap the winch to a rock or tree for vehicle-free winching. In picture B, a roller fairlead mount is set up for easy 2 bolt removal for easy storage. The heavy 1" square tube handles fully enclose the winch volume to protect it in storage. Also shown in pictures B and C is the quick disconnect power plug, which can be set up in a number of ways. If mating connectors are installed on the vehicle, the winch can be plugged in for power. On another vehicle, a short qick connect jumper cable connection can be made. The winch can even be powered for a short time off a small battery pack or a battery pulled from another vehicle, as shown in C. This can be a lifesaver if you need a winch uphill from a vehicle that might possibly roll down hill. Strap the portable winch to a tree (with a tree saver strap), then pull the cable tight with a portable battery pack and power it in or out to keep the cable tight as the vehicle is winched back onto the road.

The cradle and winch above was set up for a rig that already had a hard mounted front winch. The owner had the second winch and wanted something he could use for winching off the rear bumper or for use on rigs in the group without their own winches.

Portable winch cradles start at $150 for the basic cradle and $25 for the receiver tube (winch not included:). Contact me to discuss your requirements.

Other custom hitch receiver and winch accessories are also available. Examples are custom, extra long recovery shackle receivers, hitch receiver extensions, UHMW hawse fairleads for winches w/ the UHMW poly rope, etc. If you can think it up, 4Crawler Offroad may be able to make it, contact us with your requirements.

Used Parts:

• Spare rear axle shafts for 4WD trucks, fit either side, easy trail repair for broken axle
  • Narrow (up to '85) or wide ('86 and later) axle versions, $60.00/ea. + shipping
  • Has brake backing plate removed to reduce weight/bulk and allow axle to work on either side

Dead Beats:

Thank the following folks for no more personal checks, they have all bounced checks with 4Crawler Offroad:

• Jeff Ives
  • 922 2nd Street South
  • Kirkland WA 98033
  • wildman218@comcast.net

Choose from hundreds of the Best Selling 4X4 Handbooks, Videos, Trail Guides, Maps, Mapping Software, GPS, Bumper Stickers, Decals and More. All in stock ready for same day shipping via Priority mail at discount prices. Visit Now!