******************************************************************************* ******************************************************************************* ******** THIS PAGE BEST VIEWED WITH A MONO-SPACED FONT - Like Courier ********* ******** If you find the columns below not lining up, change fonts in ********* ******** your web browser's preference/appearance settings menu ********* ******************************************************************************* ******************************************************************************* Body lift are priced kits "ala cart", so you can pick and choose what items you need and not pay for items you don't need. Prices on this page reflect "kit discounts" on certain items. It may be a bit confusing at first, but it helps if you understand the components that go into a body lift: A body lift kit consists of: The lift blocks themselves, for example: - 10 blocks on 4Runners, 2 at the radiator, 8 under the body - 14 blocks on Pickups, 2-radiator, 4-cab and 8 under the bed - 12 blocks on Tacomas, 2-radiator, 4-cab, and 6-bed - 12 blocks on FJ-60s, 2 radiator, 10 under the body - For Ultimate block kits, the body and cab blocks are 2.5" dia. - Additional length charge is $1.00/in. for 2" dia. UHMW blocks and $1.50/in. for the 2.5" dia. UHMW blocks. Mounting hardware, i.e. longer bolts for the lift blocks - Required, but you can supply your own if desired - Specify standard or heavy duty grade - Grade 8 cab mount bolts can be supplied for an additional $15 - Hardware sized for the specific application Brackets/hw to relocate the stock Front/Rear Bumper (if needed) Brackets to relocate the RADiator (if needed) Automatic Transmission linkage extensions (if needed) Steering Shaft Extension (if needed) Examples of common kits (1" lift pricing shown): A: Standard blocks (2" nominal diameter in UHMW) B: Ultimate blocks (2" + 2.5" nominal diameter in UHMW) - Single small blocks $4.00 for 1" tall, add $1.00/in. over 1" - Single large blocks $5.00 for 1" tall, add $1.50/in. over 1" - Note that the above applies to fractional inches as well, that is the cost of a 1.5" block is the same as a 2" block. C: Standard blocks, standard grade hardware D: Ultimate blocks, standard grade hardware - For flatbed pickups (cab-only) see FAQ #6 on the main body lift kit page Note: Kits A-D are just typical combinations of lift blocks and hardware P: Polyurethane body mount bushing kit, see note #7 (provides no lift) AT: Automatic Transmission bracket, see not #8 SE: Steering shaft Extension, see note #9 BS: Bed Spacers for pickup beds, see note #10 FB: Front Bumper brackets RB: Rear Bumper relocation kits, see note #11 BB: Body-mount Brackets, see note #12 RAD: Radiator drop brackets HD: Heavy Duty (Grade 8) hardware upgrade (add-on to standard hardware kit), standard size, no drilling required To find the pricing, look down the column corresponding to your vehicle then across the row corresponding to the kit you want: Kit 4Runner P/U-Hilux Tacoma FJ-60/2 Kia(#15) Montero/ (84-02) (79-95) (95-04) (84-?) Sportage Pajero/Raider 1-3/8" see #14 --- ------- --------- ------- ------- ------------------------- A $ 40 $ 56 $ 48 $ 48 $ n/a $ 48 B 48 60 52 58 96 60 C 65 81 73 78 n/a 83 D 73 85 77 88 n/a 95 P(*7) 95-170 75-85 85 130 n/a 120-160 AT(*8) 40/50 40/50 n/a n/a n/a n/a SE(*9) 30/25 30 25 n/a n/a n/a BS(*10) 8 8/pr 8/16 n/a n/a n/a RB(*11) n/a n/a 5 n/a n/a n/a FB 10 10 10 n/a n/a n/a BB(*12) 70 n/a n/a n/a n/a n/a RAD 15/20 15 20 n/a n/a n/a ($20 3rd/4th gen 4Runner) HD 15 15 15 15 n/a 15 -------------------------------------------------------- NOTES: n/a - Not Applicable, option is either not needed or not available for this application 1. (*)Aluminum blocks available by special order, add $2.00/block over UHMW 2. Most commonly ordered kits are: D and F - Tacoma and 3rd gen 4Runner add SE, Tacoma also adds BS - Early Toyota trucks with automatics add AT over 1" lift 3. So far few people have needed the radiator brackets or any shifter modifications. They can be done at 1", some radiator flange modifications will be needed, see installation instructions for details 4. The UHMW blocks are quite popular and are available in the standard and larger diameter sizes. Hardware is now available in standard and heavy- duty grades (excluding Tacoma which requires standard hardware) 5. For lifts taller than 1", use the following table: Option 4Runner Pickup Tacoma FJ-60 Montero ----------------------------------------------------- Standard/2" +$10 +$14 +$12 +$12 +$12 Ultimate/2" +$14 +$16 +$14 +$17 +$18 Standard/3" +$20 +$28 +$24 +$24 +$24 Ultimate/3" +$28 +$32 +$28 +$34 +$36 6. Shipping weights (for 1" kit) run approximately: Toyota 4Runner 8 lbs Toyota Pickup & Tacoma 9 lbs Kia Sportage 1.375" lift blocks 7 lbs FJ-60 and Montero 11 lbs Add 2 lbs. for each additional inch of lift Add 6-8 lbs. for the poly body mount kit US Mail shipping cost and time estimate: - Typically $10.00 for regular, $15.00 insured, 2-3 days US delivery - For international shipments, country and speed will determine cost UPS shipping cost and time estimate: http://www.ups.com/ - Using the zip code: 95051 7. (P) Poly mounts for '84-89 4Runner, '79-'95 pickups, Tacoma, FJ-60, Montero - Version for '89 and later pickups and Tacoma (thru '00) cost $85 - Version for '90-'95 4Runners $140/set - Version for '96-'02 4Runners $150-180/set, varies by year - Polyurethane body mount bushings provide no lift, they simply replace the stock rubber body mount bushings - These prices include body lift kit purchase discount 8. (AT) Automatic Transmission shifter bracket for 2" - 3" lifts on Toyota pickups and 4Runners through 1995 models. 2": Cost $40 w/ kit , $45 standalone, includes hardware. 3": Cost $50 w/ kit , $55 standalone, includes hardware. Shipping weight is 1 lb. 9. (SE) Steering shaft extension available for all Toyota steering shafts, All pickups and pre-96 4Runners use the rag/u-joint style @ $30. '96 and later 4Runner and Tacoma use the rack and pinion style @ $25. 1" standard, extra length available on request. Steering shaft extension is recommended on all Tacoma and 3rd gen. 4Runner lifts. If not needed, it may be returned for credit. For additional length, add $7.50/in. for lists over 1" tall. 4Runner and pickup spacers have clearance pockets for the rag joint segments. Shipping weight is 1 lb./1", 2 lbs./2" and 3 lbs./3". 10. (BS) Bed spacers for use in locations where the bed/body is normally supported by the frame. Bed spacers are bolt on, and require a pilot hole to be drilled into the frame, or they may be welded on. Use is not required but is adviseable if heavy loads are to be carried in the bed. - 1st gen 4Runner can use 2 over the rear wheel well arch - Toyota pickups can use 2 or more bed spacers - Tacoma typically uses 2 bed spacers, longbeds use 4 Add $2/inch over 1" tall per pair of spacers 11. (RB) Rear Bumper relocation kits for Tacoma: Kit includes 4 new M12-1.25 nuts to allow redrilling the stock bumper bracket to raise the bumper, requires drilling and grinding 12. (BB) Body-mount Brackets for 1996 Toyota 4Runner (only). Supplies missing pair of body mount backets. Bolt-on installation. Cost $70/pair w/ kit, $80/pr. stand alone. 3 lbs. shipping weight. 13. 2001 and later Tacoma Front inner bumper can't be raised via a simple bracket due to inner bumper mounting on the frame. Inner bumper can be removed or relocated to allow raising the outer bumper. The FB bracket kit will then allow the outer front bumper to be raised. The Rear Bumper relocation hardware kit (RB) can be used on all Tacoma models to raise the rear bumper by modifying the stock brackets. 14. Mitsubishi Montero/Pajero - Dodge Raider Kit prices (above) based on LWB models w/ 12 body mounts. For 8 and 10 mount SWB applications, reduce prices accordingly For example: Subtract $15 for a 10 mount, 1" lift kit D, $30 for an 8 mount kit Subtract $19 for a 10 mount, 2" lift kit D, $36 for an 8 mount kit Subtract $21 for a 10 mount, 3" lift kit D, $42 for an 8 mount kit Also, on LWB GenII Monteros, the front pair of body mount bushings may not be replaceable, so if ordering a poly bushing kit, subtract $10 for the 10 bushing kit and $20 for an 8 bushing kit. 15. Kia Sportage lifts: 1-3/8" (35mm) cost is $96.00 for blocks only 3" (75mm) cost is $240.00 for blocks and bolt extensions Add $ 8.00 for black colored blocks (white is natural color) Add $10.00 for cut front blocks, easier for installation 16. Prices subject to change without notice. Residents of California, add 8.25% state sales tax. Domestic shipping runs $11.00 for regular or $15.00 for insured delivery The latest version of this document may be found at: http://www.4crawler.com/4x4/ForSale/BodyLiftPricing.txt