NOTE: I've implemented an anti-spam measure for e-mail links you enter. They will show up normally in the guestbook, but when the mailto: link is clicked, the e-mail address used will contain "NOSPAM" at the beginning to prevent this page from being used to harvest e-mail addresses. If you wish to send an e-mail to an address on this page, simply delete NOSPAM from the address.
Does anyone know how to remove a front door panel from a 97'
4Runner?
Haley <haley.loiacano@metavante.com>
Milwaukee, WI USA - Thursday, December 20, 2001 at 08:52:51 (PST)
I just purchased a '97 4Runner, and I love it; this is a great page
with lots of information. I appreciate all the information that is
provided. Very, very cool.
David A. <ZeroPsych@hotmail.com>
Colorado Springs, CO USA - Monday, December 17, 2001 at 15:04:28 (PST)
I just purchased a completely stock 1986 4Runner, 5spd manual, with
88,000 original miles. This thing is perfect to say the least. Garaged,
all service records, 1 owner, and the fiberglass top is still the same
red as the body. I paid a premium price (7,500.00) for this truck, but
I feel great about it. I personally know the original owner. This truck
has NEVER been off-road, and has never had the top removed. I did
notice that there are no seatbelts for the rear seat. Does anyone know
where I can get seatbelts for the rear seat. Thanks.
JEFF <jmaynard@infinibiz.net>
pocatello, id USA - Friday, December 14, 2001 at 03:28:00 (PST)
I am a 17 year old currently looking at buying a 1988 toyota
4Runner. The problem is the guy selling it says that it is going to
need a valve job does anyone know a cheap way to get this done? I am
also wondering about the inside door pannels does anyone know where I
can get so replacements for cheap? Any information regarding this will
be greatly appriciated. By the way this is a great site.
Logan Callahan <Hotguy1611@yahoo.com>
Redding, CA USA - Friday, December 07, 2001 at 10:21:56 (PST)
My dad has an 88 4runner,experiencing problems with 4 wheel
drive.Has auto locking hubs.300,000 miles or so,v6 sr5 manual
transmision, need help finding out whats wrong.if anyone has had this
problem or can help in any way please email me. Thanks
Bryan <SlideFreak1@hotmail.com>
Bishop, CA USA - Thursday, December 06, 2001 at 22:13:20 (PST)
Great site, first time guest. My 98 SR-5 is exhibiting a strange
chirping noise when I accelerate. The noise does not appear until about
40mph. Afetr that, during accelration it chirps and when maintain my
speed, the noise stops. Any ideas?? I would like to see some info
before taking it into the shop to get my &#@%!. Thanks, Darrell
Darrell <q11522@email.mot.com>
Crystal Lake, IL USA - Sunday, December 02, 2001 at 23:41:03 (PST)
Great site, I come here all the time for tech. info., came here
today for air compressor info. and found more than I needed. Thanks
Roger, please keep this site up. Steve Spangler
SteveS <steveanita@worldnet.att.net>
Huntington Beach, CA USA - Wednesday, November 28, 2001 at 07:13:10
(PST)
I have visited and surfed this site many times before, It is one of
my most valuable references and when budget allows (soon i hope)
4Runner upgrades. Keep on wheeling..... Luky
LukyLo <LukyLo@AOL.com>
San Jose, CA USA - Saturday, November 24, 2001 at 21:24:25 (PST)
I have a 2000 limited 4 runner, and I was wondering if anyone had
some chrome or stainless steel tail light guards that they were willing
to sell. If you do, just email me. Thanks
Zeina <ZmR5@aol.com>
houston, tx USA - Monday, October 29, 2001 at 18:08:00 (PST)
Just surfed in, great website.
Tony <info@IncreaseMileag.com>
USA - Saturday, October 27, 2001 at 23:36:53 (PDT)
Looked at a 96 4Runner Limited yesterdqy that had the brake disks
drilled all over to help with brake temperature. Has anyone heard of
this before? Is this a problem?
Ken <ken.braud@halliburton.com>
Houston, TX USA - Wednesday, October 24, 2001 at 08:14:39 (PDT)
i have an 87 4 runner for sale in pretty good condition. i have a
soft top for it kayline. the truck has a 22re, power door locks and
windows, rebuilt moter , clutch, new distributor, ngk wires and plugs,
new radiator and hoses, decent general tires w a lot of tread left. 5
speed 4 cyl. front end tight, gears and rears always greased and
maintained. am fm cd 4 speakers. truck is black without the pinstripes.
chrome grill and front bumper. power mirrors and steering. sunroof.
starts every time and goes wherever i need it to on and off road. i
love this truck and will sell it for the right price only.
marco <marco@nevprop.com>
new york, ny USA -
Dear Fellow Toyotian, Great web site. I can see you have a lot of
company here. It is very thorough and intersting. I have a 96 4x4
63,000 miles for sale or trade. It is not a rebuilder. I would really
like to trade for a solid axle truck. Anyone interested please respond.
The truck is to go cheap.
jason h. <radiowave75@hotmail.com>
columbia, mo USA -
Hey, I could use some info. I have a 95 4 runner and bought a
clinometer used. does anyone know if there already is a plug in the
dash or do I have to rig one up to the plug end on the clinometer? ANy
help would be greatly appreciated
Brian <blv7@aol.com>
Huntington, NY USA -
Hello ya'all Great site ! I am in need of something for my
Fiancee`'s 86 4runner !!! I am looking to buy a new or used bikini top
for it- and the factory that use to produce it has since gone bankrupt
! So if any one is selling one PLEASE CONTACT ME AT MY E_MAIL ADDRESS
!!!!! THANK YOU SO MUCH !
Destiny Warren <doug_n_destiny@yahoo.com>
Grass Valley, Ca USA -
ok 89 4runner, center console heater(For back seat) only blows cold
air and it gets pretty damm cold here in nova scotia canada, so can
someone tell me how to fix this????
Michael <michael@gfactory.ca>
Springhill, ns canada -
Glad you found the new web site, welcome. If you have any bookmarks
to the old site (reality.sgi.com) please update them. Thanks.
Roger Brown
<r.c.brown@ieee.org>
Santa Clara, CA USA -
WHATS UP YA'll...Im Looking to Buy a 4Runner either a 95 or a
94...What should i look for and is there a big difference between the 2
years. i know about the headgasket recall for th 94...but after the new
one is replaced....is there really any diff between the 95 engine...and
the 94. ANY COMMENTS WILL HELP.....THANKS
Charlie <chazzy@usa.com>
SanAnselmo, CA USA - Saturday, August 18, 2001 at 21:02:21 (PDT)
i'm getting a 95 sr5 4runnner on wens of next week... just wondering
if ne one had ne ideas for customization.... thanks a lot
joe <SyracuseLax02>
milford, ct USA - Saturday, August 18, 2001 at 03:02:01 (PDT)
I'm in the market to buy a 95 4runner but have some concerns. some
friends have warned that engine problems frequent this year. Can
anybody help me figure out if this is true, or just offer you opinion
of the 95. Thanks -- Russell
Russell Stipper <rstippey1@home.com>
santee, ca USA - Wednesday, August 15, 2001 at 18:30:49 (PDT)
Hi: Great site and I am looking for a solution to a very annoying
problem. I have a 1990 4Runner, 2 Door, SR5, 4 cylinder with 265k kms
on it. The engine has been completely rebuilt from the bottom up. My
problem is that when the vehicle is cold it starts ok, and will fast
idle and decrease to a regular idle as it should. Then I drive it for a
few hundred feet and it is like I'm running out of gas, the engine dies
and sputters( this will happen 4 or 5 times) but if I push the
accelerator to the floor the engine roars to life and is gone. This may
happen several times and when I drive at highway speeds you can feel it
cut in and out but only for a second or so. This started before the
engine rebuild so I don't think it is related to the engine, what I am
suspecting is maybe the fuel pump or some component in the fuel system.
It started out one day when going along the highway, and then it didn't
happen for several more days but now it is regular. This has been
happening for a year or so. Also after I drive about 10 kms and
everything is at normal temp., everything seems to work fine until it
cools down again then it starts all over again. Any suggestions would
be greatly appreciated. Thanks, Dave
Dave <dbouzane@roadrunner.nf.net>
Mount Pearl, NF Canada - Wednesday, August 15, 2001 at 08:44:12 (PDT)
need advice, i was recently the victim of car theft attempt. the
bastard mangled the ignition key cylinder in his attempt leaving my 91
toy 4x4 pickup very wounded, (broken screwdriver shaft in ignition). to
avoid the high price of a dealer's mechanic repair i may attempt to fix
the damage myself. my haynes repair manual shows this to be a realistic
job for a below-average do-it-myselfer. any help would be greatly
appreciated. once again, ignition key cylinder replacement on 1991 toy
4x4, 4cyl, 5 speed. thanks, dan 619-702-4557
dan moreno <danmorenorips@yahoo.com>
san diego, ca USA - Friday, August 10, 2001 at 19:04:14 (PDT)
Proud owner of a stock 86' 4-runner that I've had possession of for
10+ years. Today I finally thought I might try to take the top off and
take a drive in the sun. First of all it's totally lame for me to have
waited this long however, I realize why I've never tried before. I
don't know how! I first unbolted the 4 bolts on the ceiling between the
front and rear seats - no go, it won't budge. I don't see any other
bolts. Any tips???
steve <blohm25522@yahoo.com>
mission viejo, ca USA - Tuesday, August 07, 2001 at 21:42:51 (PDT)
I am trying to replace the drive train axle on the front left side
and am unable to get the front hub off. Its not in the manual and there
doesn't appear to be any nuts left to undo? Any suggestions on how to
do this.
Dennis Heinz <gs11gk@yahoo.com>
Austin, TX USA - Sunday, August 05, 2001 at 19:45:48 (PDT)
bypassed neutral safty switch. now when try to start it clicks and
somethime if you wiggle switch it will start. could it be the starter
or ignition switch.
renee gowens <craznaze@kdsi.net>
hastings, ne USA - Saturday, August 04, 2001 at 11:20:30 (PDT)
We bought an93 4 runner and the seat belts are in way bad condition
i want to change them myself...how do i get to where the belt goes into
the vinyl.? THANKS for any help
laura <jeffdrew@earthlink.net>
Jackson, WY USA - Monday, July 30, 2001 at 11:08:41 (PDT)
Ok my check engine light keeps going on and off, about every two
days, on for two days or so off for two. can anyone make a sugestion as
to why this is??
Michael <michael@gfactory.ca>
USA - Monday, July 30, 2001 at 07:55:41 (PDT)
Nice site. Have an 89 Runner and am in neeed of various small parts.
Know anyone who is parting one out? Also, where can I get a soft top
without drilling or paying a grand?
Jason <arcteryx@earthlink.net>
Lorton, VA USA - Saturday, July 28, 2001 at 15:43:32 (PDT)
Well I am having a bit of problem with my 1994 model diesel (engine
1 KZ-Te)4runner,the thing is that I cannot adjsut the idling which is
abit too high ,can you help ? as to how canit be adjusted Andy
Andy Pelissier <pap@ seychelles.net>
Mahe, seychelles - Friday, July 27, 2001 at 01:39:31 (PDT)
I'm looking for a tan leather driver's seat for a 1994 4runner. My
dog thought it tasted like a rawhide. Anyone one have any suggestions?
Don Ross <dross9014@prodigy.net>
Overland Park, KS USA - Thursday, July 26, 2001 at 14:13:27 (PDT)
Looking at buying an 89 v6 4runner and need some advice. I have read
a lot about the head problems with the v6 engine on these models and am
wondering if it is better to go with the standard 4 cyl. if anyone has
advice or experience on the longevity of the v6 vs. the 4cyl please let
me know. would like the extra power of the v6 but not expensive head
problems. thanks
chris k <toph71@hotmail.com>
san francisco, ca USA - Wednesday, July 25, 2001 at 13:00:23 (PDT)
I have an 87 4runner and love it. I finally had to do some engin
work, well with the 22re motor having 326000k I thought it was time. I
replaced timing chain and gears, hydralic tensener, guieds, water pump,
and oil pump. I also need to replace one of my front fenders and would
like some information on fiberglass fenders. Also I am looking for rear
quarters for the truck for when I paint her in the spring, and any
information on soft tops would be great THANKS.
Mike Terry <painterr2001@yahoo.com>
brighton, ont canada - Monday, July 23, 2001 at 11:19:24 (PDT)
I have an '86 4-Runner with the good old 4-banger. It has a 4"
ProComp StageII Susp. Lift and a 3" body lift. I run 33"
Kumho MT sometimes, but I mainly run my 35" Boggers. It is slow as
hell but can still get around just fine. Like everyone else, I am
looking for a used Can-Back soft top. They used to cost $675 but they
now cost $775. This is a little steep for my wallet. Hit me back if you
know anyone.
Scott Adelman <cadelman@cbu.edu>
Memphis, TN USA - Thursday, July 19, 2001 at 12:13:49 (PDT)
Great Sight. I've got a '94 runner with factory radio/tapecd anf the
cd player out. Only answer I've got so far is to buy a whole new unit
for $600 from Toyota. Anybody have ane better solutions ? Thanks
Bob <schmalz01@earthlink.net>
St Louis, MO USA - Sunday, July 08, 2001 at 20:06:52 (PDT)
Hey all, I have owned a 89 4 runner for 3 years and i dont have any
complaints. My runner has a 2 inch drop kit with kick ass 22*10 cooper
cobra tires. its Black with Chrome runners and bug gaurd and spoiler,
ALL CHROME!! Right now i am getting rdy to try to find a Catback system
for it. but being in alaska its kinda hard to find and afford. so if
any of you have a suggestions as far as that goes to where i could find
these, and order them at a resonable price that would be great. Nice to
know that there are others out there that love there 4 runners as much
as i love mine.
Buck Washer <bkya@hotmail.com>
Palmer, ak USA - Saturday, July 07, 2001 at 23:46:56 (PDT)
Fully Loaded with leather/wood trim interior,auto,ac,power pkg, tow
pkg, roof rack, bike rack, premium stereo, pearl green/dark grey trim.
Extended Warranty to 10 years/100k miles, 10yr paint protection
warranty. View Pic at http://www.geocities.com/mktmagics/4runner.jpg
Price: $24,500 negotiable ***Must Sell!!! 52K hwy miles...Original
Owner Contact: Toy_4Runner@excite.com
Nick <Toy_4Runner@excite.com>
San Francisco, CA USA - Thursday, July 05, 2001 at 20:35:51 (PDT)
I have a loaded 2000 sr5 4runner and think that brush guards really
complement the late model runners. I have been looking into them a
little bit but just don't see paying $400-$700 on one. I know they are
out there for $100-$200 but I just can't find one. If you know where to
get one please write me. I will appreciate it.
Asa <asa_is_your_daddy@hotmail.com>
Falkville , al USA - Sunday, July 01, 2001 at 12:53:12 (PDT)
I just bought a 97 4Runner SR5 4x4. It's really nice but I had a
couple of questions. First does anybody know if the
"starting" problem affects this model or year? I've read a
lot of entries talking about this problem and I want to know if I
should be looking out for it. Also, the engine idles rather fast (about
1200 rpm) when it's in park even if it's warmed up. When it's in gear
and stopped it only revs at about 8000 but I think even that is to
fast. Does anyone know how to fix this or what might cause the problem?
Rob <gamma5ed@netzero.net>
San Jose, CA USA - Friday, June 29, 2001 at 08:56:00 (PDT)
I just moved to washington. I own an 85' 4runner SR5. 96,000
original miles. It is gray with the SR5 stripes and seats. I gave it a
1 inch body lift plus a 4-inch suspension lift + extended shackles. I
am curretly running 33's on the tires and am soon looking for 35's.
Hope to get to 38's soon but the wife has a strangle hold on the wallet
and a death glare in her eyes. No engine mods. Recently pretzled the
rear driveshaft, popped the front one apart, screwed up the ring and
pinion in the rear(which i later changed Both from 4.11 to 5.29) , and
blew a bering in the T-case. All this on one trail! All that is behind
me now... All is well now, I moved my lockrights form the rear to the
front and placed a detroit in the rear. that's it!
Bob <wstraynor@hotmail.com>
Spokane, WA USA - Tuesday, June 26, 2001 at 23:47:01 (PDT)
Just found the Guestbook via a Webcrawler search for Toyota 4Runner
After market. Anyhow, I have a '97 fully loaded SR5 and am looking for
upgrading ideas. I don't plan on doing any rock climbing however will
be taking it off-road. Looks like the first mods are going to be the
K&N intake and some bug guards. It seems a ton of us are having/had
starting problems. I too have the same problem however if it starts
after 3-5 tries (one right after another). I was talking with a
locksmith a month or so ago who told me he gets tons of calls to
replace the ignition on the 4Runners. I haven't talked with him (nor
any other locksmith) but wonder if that could be the cause of the
problem we are having. Anyone have any ideas? Thanks,
David <dlcantrell@bigfoot.com>
St. Louis, MO USA - Monday, June 25, 2001 at 21:01:28 (PDT)
I own a 90' 4Runner SR5, Auto, V6 3.0L that has been my daily use
vehicle, so anything I do to it won't be too extreme until I get
another commuter. However I do alot of offroading anyway, and keep
grinding my rear bumper into the ground whether going forward or
backwards (even going up at an angle)at serious inclines. with the
wrap-around chrome bumper going tire to tire, it makes it difficult to
find smaller bumpers to try, since most offroad shops only sell bumpers
that reach from tail-light to tail-light (straight across the back) I
need a bumper that, instead of being flat and straight on the bottom,
would start at the tire and cut straight up to the tail-lights THEN
across the back. this would hopefully alleviate any tail drag on the
inclines. I'm having a hard time finding a custom shop that will do
what I want reasonably, so any suggestions or ideas on how to deal with
this would be GREATLY appreciated. I will eventually go all out on
beefing it up, but for right now I have to stay sorta moderate in what
I do to it. THANKS for any help. HOUSE
Douglas <house242@yahoo.com>
Seattle, Wa USA - Sunday, June 24, 2001 at 16:36:16 (PDT)
Hi, Greetings from Finland.
Jari Peltonen
Tampere, FINLAND - Tuesday, June 19, 2001 at 23:45:00 (PDT)
I HAve an 86 4runner. mods include a 454 hemi out of a charger a
rancho suspension kit with the adjuster located in the car a k&n
airt filter /cold air intake pioneer sounds and a roll cage
JOE HUTZMAN <XXXXXJXXXXX00@AOL.COM>
TAYLOR, MI USA - Tuesday, June 19, 2001 at 18:10:36 (PDT)
I own an 88 toyota surf (jap equivalent to the 4runner) 2.4 turbo
diesel, 6" spring lift (in the back), torsions cranked at the
front (soon to be ditched in favour of a solid axle), 3" body
lift, revolver shackles, Rancho 5012's, lockrite in the back, 33x12.5
BF Muds, modified ARB front bar, building a custom swing away rear
bumper, ditched auto hubs in favour of the AESIN manual locking hubs,
lights here there everywhere, and plently of fiddly mods sourced from
this web site. keep it up.
Rhys Williams <w_rhys@hotmail.com>
Sydney, NSW Australia - Monday, June 18, 2001 at 18:36:57 (PDT)
Looking for a owners manual for a 1995 SR5 4WD 4Runner Limited.
Would love it if someone could point me in the right direction.
Dan Chrastil <dchrastil@yahoo.com>
Columbus, GA USA - Friday, June 15, 2001 at 09:42:12 (PDT)
I recently purchased a '95 4runner sr5 with 120,000 miles. I haven't
done much with it yet, but I'd raise it about 3 inches and try to set
it up like a baja. I know it has power but I'd like to hit sand dunes
at about 85mph. Does anyone know of any magazines or sites I can check
out?
jason G <tru792001@hotmail.com>
centreville, va USA - Thursday, June 14, 2001 at 19:47:12 (PDT)
I am getting ready to possible purchase a 1989 4 Runner V.6 Utility
Deluxe. It only has 88000 miles on it and she bought it new in 1989.
Never in 4 wheel drive. She wants 7800 and we would like to offer 7300
is that fair? Please e-mail before June 16, 2001. Thanks. Dannell
Dannell <bukndoe@msn.com>
Washougal, WA USA - Thursday, June 14, 2001 at 10:02:38 (PDT)
About six months ago, I bought a '92 4Runner and I love it to death.
As of now, I have put in a K&N filtercharger, smittybuilt grill and
taillight guards, PIAA fog lights, downey exaust, etc... However, I was
wondering if there were any aftermarket superchargers or turbochargers
that would work on my 3.0 liter V6 engine. If this is not an option,
advice on wether I should put a new 3.4 liter V6 (with a supercharger
made by TRD) at a cost of $9000 or to just sell this 4Runner and buy a
'96 or above 4Runner would be greatly appriciated. Thanks- Confused in
Colorado
Travis Vaninetti <antiferret@hotmail.com>
CO USA - Wednesday, June 13, 2001 at 14:15:36 (PDT)
Hi- I have an 87 4-Runner. Who has a used soft top for sale? Or a
new one for a good price?
Kyle Harris <Mr2weenie@hotmail.com>
lakeville, mn USA - Tuesday, June 12, 2001 at 23:54:42 (PDT)
Help TOYOTA TECHS and Owners.... Starting Problem.... 91 V6 4 Runner
VERY FRUSTRATING, Please read My post listed below on August 20th 2000,
I have had a few responses from owners looking at this page with
EXACTLY the same problem, We are sticking together on this and would
appreciate any response on an absolute fix for this Problem, to add to
the post I must say the 4Runner will start if Jumped... The last time I
checked with the Toyota dealers they had NO idea how to fix this
problem Thanks Again... Fingers Crossed...
Philip <Rbnhd1144@aol.com>
Salem, OR USA - Thursday, June 07, 2001 at 01:08:45 (PDT)
Last night aliens visited me and told me of a new world order
involving the enslaving of mutant carrots and the chin dynasty. It was
foretold by the large garbage can in my dream that I would be a leader
among this people and my 4runner would fly with wings to a new galaxy
as I pass through the rift of my uterus. It was an amazing dream and
the aliens told me to just us LSD again if I wanted to contact them.
Since then we’ve been in frequent contact. If anyone would like to
join my space quest and help me build my wings for my 4runner out of
old computer parts. The aliens tell me how it’s cool.
john hopkins <johnh@hotmail.com>
Tacoma, WA USA - Wednesday, June 06, 2001 at 16:01:47 (PDT)
Well I guess im not alone, I own a 1989 4runner and am also looking
for a soft top, they are available in the states for about a grand but
im not that rich or am I willing to drill over 40 holes in my truck, so
let me know if there are any tops in CANADA
Michael Ripley <michael@gfactory.ca>
Springhill, NS Canada - Friday, June 01, 2001 at 11:48:00 (PDT)
wanted: SR5 alloy mags. i have been looking for these aluminum
wheels that came on early 90's 4 runners, but dont want to spend $500.
does anybody know where i could get a set for a good price? thanks.
Jeremy <jdoane@gonzaga.edu>
Spokane/Seattle, WA USA - Friday, June 01, 2001 at 11:40:46 (PDT)
i have just bought my first 1990 4runner, i am 17 years old and love
this truck. but i dented the back bumper offroading when i bottomed out
on a rock, overall the truck is in good shape so i am looking for a
replacement new or used. if you could help me thanks alot. and i am
also looking for a used front passenger door with no or little rust
mine has rusted to far to be fixed.thanks
pat kennedy <soccerpck@aol.com>
Newton, N,H USA - Thursday, May 31, 2001 at 18:48:41 (PDT)
i have just bought my firts 1990 4runner, i am 17 years old and love
this truck. but i dented the back bumper offroading when i bottomed out
on a rock, overall the truck is in good shape so i am looking for a
replacement new or used. if you could help me thanks alot. and i am
also looking for a used front passenger door with no or little rust
mine has rusted to far to be fixed.thanks
pat kennedy <soccerpck@aol.com>
Newton, N,H USA - Thursday, May 31, 2001 at 18:47:27 (PDT)
I have owned a 95 4-runner for 3+ years now and I love it. It was
all stock when I purchased it. V6 auto, loaded. Well, now it reads
like; 33-12/50s, American Racing Tailgunners, flowmaster (sounds
great), dual 3inch tips, K&N, Downey skid plate, 12 speaker 550
watt stereo, Tint,KC highlights and I'm not near done. Can anybody
recommend a 4-runner specific aftermarket dealer? I plan on owning this
vehicle for a long long time and I, just like the rest of you just
can't stop trickin' it up. GREAT SITE!
John <Johnhud@petco.com>
Frisco, tx USA - Thursday, May 31, 2001 at 07:00:43 (PDT)
I just bought a 1998 Toyota 4Runner limited and I'm looking to add
more pieces to the already wood dash but where is the best place to get
matching factory pieces without costing an arm and a leg I only want
specific pieces without having to buy the hole kit Any Idea's MP
Mike Pompa <Pompa@mediaone.net>
Feeding Hills, MA USA - Wednesday, May 30, 2001 at 18:55:52 (PDT)
Got myself an '86 4Runner. With the weather finally getting nice I
was looking to get a soft top. Where would one go about looking for one?
Ryan <ponderingmind@yahoo.com>
Cannon Falls, MN USA - Sunday, May 27, 2001 at 08:02:24 (PDT)
Did anyone convert from a 4 cyl to 6 cly. i have a five spd manual
tranny. was it difficult? worth it? problems involved? thanks for you
tips.
marco <marco@nevprop.com>
ny, ny USA - Thursday, May 24, 2001 at 10:19:46 (PDT)
I have a 1990(sr5 4 cylinder) 4-runner that is making this chirping
noise while I drive. It seems to get louder as I accelerate. Has anyone
else had this problem and know of any solutions? Laura
Laura <a99laura99@hotmail.com>
canada - Thursday, May 17, 2001 at 07:46:47 (PDT)
I have a pretty nice 87 4 runner, all black, power everything. 4
banger. 5 spd. it is short on uphill power. i am running a 22re from an
85 celica that has been kinda rebuilt. Bottom end only. body is clean
interior nice. (gray cloth) soft top. AC. I was thinking about selling
it. I would rather keep it though. here are my lastest issues, when the
rain comes down hard, the engine idles low and even mises a bit. then
it takes a day or so to start running right again. after that it runs
like a dream for a month or two. the other issue is suspenion, when i
hang a u turn, the front end creaks and groans loudly. any ideas what
this is?
marco <marcsmarc@aol.com>
ny, ny USA - Thursday, May 10, 2001 at 12:27:17 (PDT)
I just bought a 2001 4Runner, and traded my 1999 4 runner for it. I
had a set of goodyear MTRS on the 99, and had them swaped onto the
2001. The probelm is now my tires rub like hell. does anyone know what
changed, and can I do anything to help, without changing tires. Also
does anyone know of a company that makes a lift for the 2001? dane
Dane <daneyzz@msn.com>
Roy, UT USA - Wednesday, April 25, 2001 at 10:46:33 (PDT)
Carbon Fiber Hoods for 1996-2001 Toyota 4runner w/ hood scoop. I was
hoping to get some opinions if these are worth producing. Give me
e-mail if you like the idea to roger@suvclass.com :) thanks!
Roger <roger@suvclass.com>
Los Angeles, CA USA - Tuesday, April 24, 2001 at 16:33:33 (PDT)
Hey everyone, I've got an '88 4runner and am loving it, however with
spring here i am looking to switch to a softtop. What are my best
options as I don't have a huge budget. Any ideas? Nice site. Beau
Beau Faulkner <beaubafett@yahoo.com>
Marysville, Pa USA - Tuesday, April 24, 2001 at 06:34:49 (PDT)
Seems others have rec'd good feedback from you...so I'll follow
suit, if thats alright. I have a 91 4Runner 6cyl. and it doesn't always
start up lately...usually 3 turns of the key with just a click and then
the fourth starts it up...sometimes on the first try as if nothing is
wrong...solenoid? starter? And can I do this myself with dropping the
engine or some major removal? I'm no master mechanic...can you advise
me? Thanks for your site!
Mikke Lind <mikkel@parkerservices.com>
Seattle, WA USA - Tuesday, April 17, 2001 at 16:41:06 (PDT)
Have seen you out on the trail a few times and enjoy your site a
great deal. It is hard to find information on some of the more obscure
trails in California that I like to traverse. Please stop by my website
and take a look.
John Denholm <jdbronco@hotmail.com>
Dublin, Ca USA - Friday, April 13, 2001 at 16:42:23 (PDT)
What's up people, just letting you that i love the site. I drive a
red '86 4Runner with few modifications. If anyone has any more cheap
tricks not included on the site, please e-mail me. Happy wheelin'.
Louis Knerr <LHK37@aol.com>
Killen, AL USA - Tuesday, April 03, 2001 at 17:59:52 (PDT)
I thank you for this great site, it took me several hours to get to
it from the mass of other 4 runner listings but glad I did get here.
Your tricks section answered my questions and a couple I had not
thought about. I have run a 4x4 short bed R22 fom 1 year old, vintage
1977 and it is now with normal rotted box but rest good and mechanics
perfect although its a low milage (190,000km) So will do it up over
this summer. In its place I have an 89 4 runner 2 door SR that is
showroom body and mostly good mechanicaly with high milage 300.000 +
km. Now doing interior up and your tips helped alot. Need to know what
can be done to upgrade/renew the quasi chrome rain gutters that are
above the windows?
David Lowe <davidlowe@sympatico.ca>
Owen Sound, oon Canada - Sunday, April 01, 2001 at 18:24:13 (PDT)
I'm hoping to get my first Toyota 4x4 soon. I'm pretty straped for
cash at the moment but I have my Fiero for sale. A couple of my friends
have 4x4 trucks so I want to get my own to go with them off-roading.
Thanks just wanted to sign the guestbook.
Mitchell Adshade <mitchelladshade@hotmail.com>
NS Canada - Saturday, March 31, 2001 at 06:28:54 (PST)
greetings from switzerland.i have `90 4 Runner v6.
Philipp <Gonz@gmx.ch>
Frauenfeld, tg Switzerland - Thursday, March 29, 2001 at 08:56:16 (PST)
i have and 86 runner and the rear leaf springs are really sagging
and weak. it seams like the 88-89 runner's rear springs are a little
more stout. would those transfer over and is that the right way to go?
has any one ever used those add-a-leafs? are there any other rigs that
have strong springs that i could get in my runner that are more stout
(like something i could get at a junk yard). any help would be great!
ps. just turned 280,000 miles!
jared <stevenpatrick@hotmail.com>
boise, id USA - Thursday, March 22, 2001 at 23:17:06 (PST)
Have an 86 4Runner with bad crankshaft and a lot of miles. I'm
looking for inexpensive engines or conversion options for nonToyota
engines. Advice and links would be much appreciated. SE US region.
Thanks, jim
Jim Bennett <jimebennett@visto.com>
Tn and Ga, GA USA - Thursday, March 22, 2001 at 20:48:22 (PST)
What gas milage should I expect from an 85-86 4Runner with a new
motor? The EPA says it should get around 25 mpg, but I'm not sure this
is right. Thanks alot
Christian Sigg <msigg@cache.net>
Richmond, UT USA - Monday, March 19, 2001 at 21:58:30 (PST)
I busted a mirror off my 98 4runner. I bought a replacement but am
having trouble getting the door panel off to get to the screws on the
back side. any advice?
kim <kimsue@centurytel.net>
USA - Saturday, March 17, 2001 at 16:06:27 (PST)
Roger.........All I can say is thanks for all the e-mails that you
have responded too. I must have sent you over 50 e-mails and you have
responded to each one with your best answer which was usually on the
money. I'd like to thank you for having such a great website for people
to go to so they can learn how to do more hands on things. GREAT SITE
and great KNOWLEDGE.
Jason Wohlfehrt <saudiarabian4runner@hotmail.com>
Woodbridge, VA USA - Sunday, February 25, 2001 at 14:52:13 (PST)
Hi, Greetings from Finland.
Jari Peltonen <jari111@excite.com>
Tampere, FINLAND - Thursday, February 22, 2001 at 13:09:29 (PST)
Nice webpage you have here, and WELCOME to visit my webpage.
27 IDX 106 - Odinn
Reykjavik, ICELAND - Wednesday, February 21, 2001 at 13:37:18 (PST)
anyone know where i can purchase bumber guards, also known as bush
guards, for my 1999 4Runner. (i live in the San Francisco Bay area)
would love any suggest..thanks!!
Elke Augustino <travelgerl@hotmail.com>
USA - Friday, February 16, 2001 at 12:37:09 (PST)
FANTASTIC SITE....been searchin' for an 88 4-Runner and really
welcome having access to so much great information. I really appreciate
the attention to detail and pity the "toy wheeler" who goes
upo against your 85' Any 88's for sale ...please e-mail me
Proclaimer99@yahoo.com Thanks
Jim <Proclaimer99@yahoo.com>
Baltimore, Md USA - Wednesday, February 14, 2001 at 13:31:09 (PST)
Great site! I have an '86 4Runner and I am looking for a bikini top.
Do you know where I can find one, or if anyone has one for sale?
Brice <Drivehapy@hotmail.com>
B'ham, Al USA - Tuesday, February 13, 2001 at 14:37:59 (PST)
hi im looking at a surf 4 runner in the uk 93 3.0 turbo diesel auto
with a/con e/w c/l alloys 9000 uk pounds not for serious off roading
but love to play so paynplay or walk
alan <alan.lambert@tesco.net>
sandford, dorset uk - Saturday, February 03, 2001 at 13:45:18 (PST)
1990 4runner 4cyl 4x4 need to know the spark plug gaps( not listed
under hood, don't have manual). also rear rubber bumpstops are just
laying sideways inside rear coils, and i can't see how to re-attach.
ryan <visualsolutions@another.com>
ottawa, on canada - Thursday, February 01, 2001 at 20:11:56 (PST)
At about 30 mph on washboard roads, my stock 99 4 runner 4x4 rear
end loses traction and starts sliding around resulting in loss of
control. Any ideas on how to fix would be helpful. A friend put
bilstiens on his 4 runner but this did not help.
dean <mesashep@hotmail.com>
mesa, az USA - Monday, January 29, 2001 at 20:29:28 (PST)
I love my truck plan and simply i have a 92 4-runner...its never
done me wrong..and i'm glad to see this website and all the other proud
parents. everyone have fun with there babies...ENJOY
Chris Perez <cpscar@aol.com>
Vista, Ca USA - Monday, January 29, 2001 at 08:26:36 (PST)
I am considering buying a 88 4-Runner as a 4x4 project, but I only
want a 4x4 that has a limited slip (POSI) rear differential. Does
anyone know if Toyota offered a limited slip differential in 88? If so,
how do you determine by sight if it is a limited slip differential?
K Ross <papagoal@aol.com>
Broomfield, CO USA - Sunday, January 28, 2001 at 13:34:26 (PST)
I just bought my first Toyota Truck. Even though I am a very pretty
(I think) girl, all my family thinks I a now either a lesbo or a
tomboy!. Well, neither is true. I just like to ride high up and look
down on all the rest of the drivers in the world. But I have a question
for you men. My Tundra does not have factory foglamps. I called the
dealer and they now want $400.oo for what would have been a $100.00
option. My question is: Where can I go to get some factory (or other)
foglamps that will fit my toyota truck spot in the bumper where the
factory foglights are supposed to go? I need a good foglamp, but not
for $400.00! I would appreciate any help. Thanks again, Paulette.
Paulette Joy <paulettejoy@aol.com>
Simi Valley, CA USA - Friday, January 26, 2001 at 16:51:02 (PST)
Your page helped alot with my '85 Runner thanks
Jason <toyota4x4fan@hotmai.com>
Knoxville, Tn USA - Thursday, January 25, 2001 at 09:42:01 (PST)
Toyota 4-Runners kick butt!!
Damien <dhermens@hotmail.com>
Seattle , WA USA - Monday, January 15, 2001 at 22:49:02 (PST)
Great 4runner website, I don't find too many of them so it's nice
when I finally do find one. I have an 89' 4runner with new 35"
BFG's, 2 inch body lift, 5 inch lift, leaf springs, custom paint,
Clarion system, side steps, Rancho shocks, etc. Right now I am getting
ready to install a new timing chain and a new header (old manifold was
cracked). In the next year I plan to install a Pro comp light bar, KC
lights, new rear bumper, and numerous other goodies. The only
complaints I have is bad gas mileage due to the size of the tires. I'm
very pleased with everything else though, it's a nice truck and it's
definitely a looker.
Shyna <MXgirl@yahoo.com>
OR USA - Thursday, January 11, 2001 at 01:08:39 (PST)
